Skip to main content

My first 'home made' Reprap hotend/nozzle



This one was made by myself, my very first 'home made' hotend for my Prusa Air 2 3D printer, 0.4 mm nozzle, 2 x 6r8 resistors, 3mm filament. Made of brass and ptfe.

Pic.1 just another reprap hotend...

The one from Pic.1 was based on my first hotend I got on ebay, which started to leak ABS after few days of printing (Pic. 2). Yeap, this black 'thing' is a melted ABS.. My version worked quite well but I didn't have time to fully test it.
I can only say that PTFE is not great for higher temperatures, probably it would last longer if used with PLA:175-180 degrees but it gets too soft at 230..

Pic.2 Leaking PTFE hotend

Comments

  1. Unknown5 May 2013 at 20:29

    Same problem with another hotend purchased in ebay, also with ptfe. Im also working in a new hotend fully made in aluminium, if it works I upload the diagrams.

    ReplyDelete

Post a Comment

Popular posts from this blog

How To: Run Compaq ESP127 power supply model: PS-5501

I got ESP127 power supply from an old Compaq server some time ago, with intention to use it as my RepRap printer power supply. But I couldn't find any useful information on the internet on how to get it to power on.  Today, I've decided to grab my multimeter and play with it to see if I will be able to get it to work. By default when you plug the power cord to it, the cooling fan will start spinning but the green LED at the back will stay off and there will be no voltage (or almost no voltage) on any of the power rails +3.3v, +5v, +12v. This power supply +12v rail can handle 25 amperes which makes it perfect for a reprap.  After an hour or so... I saw a green light ;)  I've soldered terminal socket to the 12v pads to make it more portable and easy to setup.
7 comments
Read more

Ramps 1.4 LCD with Marlin firmware

Small upgrade for my Prusa Air 2 reprap :).. I got this pcb with rotary switch and LCD from ReprapDiscount, they sell really nice looking and quality Ramps kits for quite cheap. Apparently they sell quite a lot of these LCD boards.  To get the LCD board to work you need to uncomment kollowing line in your Configuration.h file // The RepRapDiscount Smart Controller // http://reprap.org/wiki/RepRapDiscount_Smart_Controller #define REPRAP_DISCOUNT_SMART_CONTROLLER Polish translation was done in Google translator probably ;), 'Ubity'? LoL Starting to love Marlin firmware especially with the ReprapDiscount smart controller. All the language  translations are in the file language.h, choose your language and voila :). Of course some of the translations aren't perfect. // Languages // 1  English // 2  Polish // 3  French (awaiting translation!) // 4  German // 5  Spanish // 6  Russian // 7  Italian // 8  Portuguese #define
Post a Comment
Read more

SLA LCD / DLP Resin 3D Printer

It's been a while since my last post, finally got some time for a short update. I have decided to try SLA type printer as these have much higher resolution comparing to FDM printers. I'm a hands on person so instead of buying one I've decided to design and build one by myself, it's always a fun and a good way of learning new skills. The main goal is to build an LCD-based 3D printer that will work with both UV and Daylight resins. For now, I will try to get it to work only with daylight curing resins as the iPad LCD won't really pass anything below 450nm. Here are some renders: It's designed around iPad 9.7" retina LCD. I'm planning to add LED array underneath the screen (460-465nm epileds) and remove backlight diffusers and the polarizer. I'm currently working on FEP film VAT.
Post a Comment
Read more